Mast Cleat Mishap
I managed to botch what should have been a 10 minute job. I removed the v-cleat/jam cleat on the mast by drilling off the rivet heads and sanding flush. The horn cleat replacement was to go just below that. My pilot holes for the #10 stainless screws went from too small to slightly TOO BIG. It was late, I was tired, should have waited on this job. I filled the holes with JB weld and threw away the plastic horn cleat now sticky with 4200. (Pic shows different cleat but I went with...
Mast Cleat Mishap
Mast Cleat Mishap