Some picts of the 2006 Hull
I was out with some heat and a scraper.
There was a large lump of resin up in the curved area I really wanted to get out. I also got a bunch off to make sanding a bit easier.
I found out the white epoxy (my guess) that holds the top to the bottom get soft with a bit of heat. It was real easy to clear out the bit of epoxy that were keeping the deck from fitting down to the hull. Now I can get the edges to line up.
I cut away the resin and bad edges of fiberglass on the top hole. Now I can...
Some picts of the 2006 Hull
There was a large lump of resin up in the curved area I really wanted to get out. I also got a bunch off to make sanding a bit easier.
I found out the white epoxy (my guess) that holds the top to the bottom get soft with a bit of heat. It was real easy to clear out the bit of epoxy that were keeping the deck from fitting down to the hull. Now I can get the edges to line up.
I cut away the resin and bad edges of fiberglass on the top hole. Now I can...
Some picts of the 2006 Hull