CRASH PAD - Raw Material can Save you Money
CRASH PAD Material - Improve Your Good Seat with
The Right Stuff.
You need a couple of inches of The Right Stuff under your butt or you’re asking for trouble!!
And you can get The CRASH PAD Raw Material to put under your existing upholstery.
Upholstery type foam rubber will not help in high speed impact and should be removed when installing CRASH PAD Material.
Regular foam rubber does not have enough resistance and will bounce after compression which drives your spine back up into your downward moving head and body.
This just increases the compression of your spine from both ends.
Other shock absorbing material sold for seats is really made for free impact by a rounded surface like a helmet, knee, etc and is far too stiff for the seat bottom application.
CRASH PAD Material has the Right compression resistance to support your weight AND THEN, compress evenly when an impact occurs.
This is very important for the maximum reduction of spinal compression forces.
The material used in The CRASH PAD TESTED BEST for the US Military in dummy drop tests where sensors were placed in the dummy's back to actually measure forces on the spine.
You can add The Right Stuff under your existing seat upholstery.
The CRASH PAD's shock absorbing raw material is offered in sheet form to cut, fit and customize to your seat and existing upholstery.
Just remember that thicker is better.
More thickness and more surface area under your Butt and Lumbar area will provide the compressible space needed to slow your downward motion in a frame bottom impact during a crash.
Other materials can be rigid or ineffective in high speed impact and DO NOT USE FOAM RUBBER! or anything that bounces.
It can actually add G forces to an impact when it springs back and drives your spine back up into your downward moving head.